⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Pennington County › Quinn (57775)

Quinn, SD (57775): well depth, water level & drilling cost

✓ 76 SD DANR records · Pennington County

60 ftmedian well depth
46 ft–140 fttypical depth range
6 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Quinn (57775) address — $49

How deep are wells in and around Quinn (57775), South Dakota?

The median drilled well depth in and around Quinn (57775) is 60 ft, based on 75 wells with recorded depths in the state SD DANR database. Half fall between 46 ft and 140 ft; 90% are shallower than 234 ft.

How much does it cost to drill a well in and around Quinn (57775)?

Applying published per-foot rates to the local median depth of 60 ft: drilling and casing alone typically runs $1,500–$3,900; a complete system including pump, pressure tank, and hookup typically runs $3,600–$6,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Quinn (57775)?

The median static water level is 6 ft below ground surface (middle half of wells: 6 ft–6 ft), from 1 measurements.

Drilled depth distribution

0–50 ft 21 50–100 ft 31 100–150 ft 8 150–200 ft 2 200–300 ft 7 300–400 ft 0 400–600 ft 1 600+ ft 5
Looking at a specific property in Quinn (57775)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Quinn (57775)

Free. Goes to licensed drillers working Pennington County.

Part of Pennington County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.