⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Custer County › Pringle (57773)

Pringle, SD (57773): well depth, water level & drilling cost

✓ 1,141 SD DANR records · Custer County

199 ftmedian well depth
125 ft–286 fttypical depth range
44 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Pringle (57773) address — $49

How deep are wells in and around Pringle (57773), South Dakota?

The median drilled well depth in and around Pringle (57773) is 199 ft, based on 1,140 wells with recorded depths in the state SD DANR database. Half fall between 125 ft and 286 ft; 90% are shallower than 400 ft.

How much does it cost to drill a well in and around Pringle (57773)?

Applying published per-foot rates to the local median depth of 220 ft: drilling and casing alone typically runs $5,500–$14,300; a complete system including pump, pressure tank, and hookup typically runs $13,200–$22,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Pringle (57773)?

The median static water level is 44 ft below ground surface (middle half of wells: 27 ft–60 ft), from 212 measurements.

Drilled depth distribution

0–50 ft 36 50–100 ft 81 100–150 ft 265 150–200 ft 188 200–300 ft 302 300–400 ft 149 400–600 ft 89 600+ ft 30
Looking at a specific property in Pringle (57773)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Pringle (57773)

Free. Goes to licensed drillers working Custer County.

Part of Custer County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.