South Dakota Well Data › Bennett County › Batesland (57716)
Batesland, SD (57716): well depth, water level & drilling cost
✓ 126 SD DANR records · Bennett County
Pull every recorded well near a Batesland (57716) address — $49
How deep are wells in and around Batesland (57716), South Dakota?
The median drilled well depth in and around Batesland (57716) is 100 ft, based on 125 wells with recorded depths in the state SD DANR database. Half fall between 60 ft and 170 ft; 90% are shallower than 284 ft.
How much does it cost to drill a well in and around Batesland (57716)?
Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Batesland (57716)?
The median static water level is 25 ft below ground surface (middle half of wells: 9 ft–69 ft), from 16 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Bennett County.
Part of Bennett County well records.
Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.