⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Campbell County › Herreid (57632)

Herreid, SD (57632): well depth, water level & drilling cost

✓ 116 SD DANR records · Campbell County

80 ftmedian well depth
42 ft–225 fttypical depth range
43 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Herreid (57632) address — $49

How deep are wells in and around Herreid (57632), South Dakota?

The median drilled well depth in and around Herreid (57632) is 80 ft, based on 116 wells with recorded depths in the state SD DANR database. Half fall between 42 ft and 225 ft; 90% are shallower than 278 ft.

How much does it cost to drill a well in and around Herreid (57632)?

Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Herreid (57632)?

The median static water level is 43 ft below ground surface (middle half of wells: 16 ft–53 ft), from 7 measurements.

Drilled depth distribution

0–50 ft 34 50–100 ft 37 100–150 ft 8 150–200 ft 5 200–300 ft 24 300–400 ft 2 400–600 ft 0 600+ ft 6
Looking at a specific property in Herreid (57632)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Herreid (57632)

Free. Goes to licensed drillers working Campbell County.

Part of Campbell County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.