⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Ziebach County › Dupree (57623)

Dupree, SD (57623): well depth, water level & drilling cost

✓ 92 SD DANR records · Ziebach County

128 ftmedian well depth
91 ft–166 fttypical depth range
16 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Dupree (57623) address — $49

How deep are wells in and around Dupree (57623), South Dakota?

The median drilled well depth in and around Dupree (57623) is 128 ft, based on 92 wells with recorded depths in the state SD DANR database. Half fall between 91 ft and 166 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Dupree (57623)?

Applying published per-foot rates to the local median depth of 128 ft: drilling and casing alone typically runs $3,200–$8,320; a complete system including pump, pressure tank, and hookup typically runs $7,680–$12,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Dupree (57623)?

The median static water level is 16 ft below ground surface (middle half of wells: 12 ft–30 ft), from 14 measurements.

Drilled depth distribution

0–50 ft 13 50–100 ft 12 100–150 ft 28 150–200 ft 23 200–300 ft 12 300–400 ft 2 400–600 ft 1 600+ ft 1
Looking at a specific property in Dupree (57623)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Dupree (57623)

Free. Goes to licensed drillers working Ziebach County.

Part of Ziebach County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.