⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Bennett County › Tuthill (57574)

Tuthill, SD (57574): well depth, water level & drilling cost

✓ 289 SD DANR records · Bennett County

120 ftmedian well depth
80 ft–200 fttypical depth range
24 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Tuthill (57574) address — $49

How deep are wells in and around Tuthill (57574), South Dakota?

The median drilled well depth in and around Tuthill (57574) is 120 ft, based on 289 wells with recorded depths in the state SD DANR database. Half fall between 80 ft and 200 ft; 90% are shallower than 282 ft.

How much does it cost to drill a well in and around Tuthill (57574)?

Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Tuthill (57574)?

The median static water level is 24 ft below ground surface (middle half of wells: 14 ft–39 ft), from 72 measurements.

Drilled depth distribution

0–50 ft 10 50–100 ft 89 100–150 ft 84 150–200 ft 32 200–300 ft 48 300–400 ft 16 400–600 ft 10 600+ ft 0
Looking at a specific property in Tuthill (57574)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Tuthill (57574)

Free. Goes to licensed drillers working Bennett County.

Part of Bennett County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.