⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Todd County › Parmelee (57566)

Parmelee, SD (57566): well depth, water level & drilling cost

✓ 76 SD DANR records · Todd County

243 ftmedian well depth
167 ft–300 fttypical depth range
22 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Parmelee (57566) address — $49

How deep are wells in and around Parmelee (57566), South Dakota?

The median drilled well depth in and around Parmelee (57566) is 243 ft, based on 76 wells with recorded depths in the state SD DANR database. Half fall between 167 ft and 300 ft; 90% are shallower than 358 ft.

How much does it cost to drill a well in and around Parmelee (57566)?

Applying published per-foot rates to the local median depth of 243 ft: drilling and casing alone typically runs $6,075–$15,795; a complete system including pump, pressure tank, and hookup typically runs $14,580–$24,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Parmelee (57566)?

The median static water level is 22 ft below ground surface (middle half of wells: 21 ft–80 ft), from 3 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 3 100–150 ft 8 150–200 ft 10 200–300 ft 28 300–400 ft 21 400–600 ft 3 600+ ft 0
Looking at a specific property in Parmelee (57566)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Parmelee (57566)

Free. Goes to licensed drillers working Todd County.

Part of Todd County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.