⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Lyman County › Lower Brule (57548)

Lower Brule, SD (57548): well depth, water level & drilling cost

✓ 74 SD DANR records · Lyman County

1,120 ftmedian well depth
80 ft–1,313 fttypical depth range
—median static water level
—median yield (— tests)

Pull every recorded well near a Lower Brule (57548) address — $49

How deep are wells in and around Lower Brule (57548), South Dakota?

The median drilled well depth in and around Lower Brule (57548) is 1,120 ft, based on 74 wells with recorded depths in the state SD DANR database. Half fall between 80 ft and 1,313 ft; 90% are shallower than 1,391 ft.

How much does it cost to drill a well in and around Lower Brule (57548)?

Applying published per-foot rates to the local median depth of 1,120 ft: drilling and casing alone typically runs $28,000–$72,800; a complete system including pump, pressure tank, and hookup typically runs $67,200–$112,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Lower Brule (57548)?

Few static water level measurements are recorded for this area.

Drilled depth distribution

0–50 ft 13 50–100 ft 8 100–150 ft 2 150–200 ft 0 200–300 ft 0 300–400 ft 0 400–600 ft 0 600+ ft 51
Looking at a specific property in Lower Brule (57548)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Lower Brule (57548)

Free. Goes to licensed drillers working Lyman County.

Part of Lyman County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.