South Dakota Well Data › Jackson County › Long Valley (57547)
Long Valley, SD (57547): well depth, water level & drilling cost
✓ 82 SD DANR records · Jackson County
Pull every recorded well near a Long Valley (57547) address — $49
How deep are wells in and around Long Valley (57547), South Dakota?
The median drilled well depth in and around Long Valley (57547) is 160 ft, based on 82 wells with recorded depths in the state SD DANR database. Half fall between 120 ft and 218 ft; 90% are shallower than 270 ft.
How much does it cost to drill a well in and around Long Valley (57547)?
Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Long Valley (57547)?
The median static water level is 50 ft below ground surface (middle half of wells: 30 ft–62 ft), from 17 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Jackson County.
Part of Jackson County well records.
Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.