South Dakota Well Data › Stanley County › Fort Pierre (57532)
Fort Pierre, SD (57532): well depth, water level & drilling cost
✓ 108 SD DANR records · Stanley County
Pull every recorded well near a Fort Pierre (57532) address — $49
How deep are wells in and around Fort Pierre (57532), South Dakota?
The median drilled well depth in and around Fort Pierre (57532) is 60 ft, based on 108 wells with recorded depths in the state SD DANR database. Half fall between 35 ft and 1,379 ft; 90% are shallower than 2,162 ft.
How much does it cost to drill a well in and around Fort Pierre (57532)?
Applying published per-foot rates to the local median depth of 60 ft: drilling and casing alone typically runs $1,500–$3,900; a complete system including pump, pressure tank, and hookup typically runs $3,600–$6,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Fort Pierre (57532)?
The median static water level is 14 ft below ground surface (middle half of wells: 12 ft–15 ft), from 4 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Stanley County.
Part of Stanley County well records.
Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.