⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Spink County › Redfield (57469)

Redfield, SD (57469): well depth, water level & drilling cost

✓ 477 SD DANR records · Spink County

920 ftmedian well depth
860 ft–970 fttypical depth range
10 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Redfield (57469) address — $49

How deep are wells in and around Redfield (57469), South Dakota?

The median drilled well depth in and around Redfield (57469) is 920 ft, based on 472 wells with recorded depths in the state SD DANR database. Half fall between 860 ft and 970 ft; 90% are shallower than 1,049 ft.

How much does it cost to drill a well in and around Redfield (57469)?

Applying published per-foot rates to the local median depth of 920 ft: drilling and casing alone typically runs $23,000–$59,800; a complete system including pump, pressure tank, and hookup typically runs $55,200–$92,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Redfield (57469)?

The median static water level is 10 ft below ground surface (middle half of wells: 2 ft–18 ft), from 11 measurements.

Drilled depth distribution

0–50 ft 30 50–100 ft 49 100–150 ft 14 150–200 ft 1 200–300 ft 2 300–400 ft 1 400–600 ft 2 600+ ft 373
Looking at a specific property in Redfield (57469)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Redfield (57469)

Free. Goes to licensed drillers working Spink County.

Part of Spink County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.