⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Spink County › Doland (57436)

Doland, SD (57436): well depth, water level & drilling cost

✓ 194 SD DANR records · Spink County

888 ftmedian well depth
95 ft–976 fttypical depth range
45 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Doland (57436) address — $49

How deep are wells in and around Doland (57436), South Dakota?

The median drilled well depth in and around Doland (57436) is 888 ft, based on 190 wells with recorded depths in the state SD DANR database. Half fall between 95 ft and 976 ft; 90% are shallower than 1,031 ft.

How much does it cost to drill a well in and around Doland (57436)?

Applying published per-foot rates to the local median depth of 888 ft: drilling and casing alone typically runs $22,200–$57,720; a complete system including pump, pressure tank, and hookup typically runs $53,280–$88,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Doland (57436)?

The median static water level is 45 ft below ground surface (middle half of wells: 15 ft–63 ft), from 8 measurements.

Drilled depth distribution

0–50 ft 11 50–100 ft 39 100–150 ft 12 150–200 ft 2 200–300 ft 0 300–400 ft 1 400–600 ft 1 600+ ft 124
Looking at a specific property in Doland (57436)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Doland (57436)

Free. Goes to licensed drillers working Spink County.

Part of Spink County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.