⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Brown County › Columbia (57433)

Columbia, SD (57433): well depth, water level & drilling cost

✓ 163 SD DANR records · Brown County

929 ftmedian well depth
220 ft–1,039 fttypical depth range
10 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Columbia (57433) address — $49

How deep are wells in and around Columbia (57433), South Dakota?

The median drilled well depth in and around Columbia (57433) is 929 ft, based on 162 wells with recorded depths in the state SD DANR database. Half fall between 220 ft and 1,039 ft; 90% are shallower than 1,105 ft.

How much does it cost to drill a well in and around Columbia (57433)?

Applying published per-foot rates to the local median depth of 929 ft: drilling and casing alone typically runs $23,225–$60,385; a complete system including pump, pressure tank, and hookup typically runs $55,740–$92,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Columbia (57433)?

The median static water level is 10 ft below ground surface (middle half of wells: 10 ft–10 ft), from 4 measurements.

Drilled depth distribution

0–50 ft 7 50–100 ft 12 100–150 ft 21 150–200 ft 0 200–300 ft 3 300–400 ft 0 400–600 ft 0 600+ ft 119
Looking at a specific property in Columbia (57433)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Columbia (57433)

Free. Goes to licensed drillers working Brown County.

Part of Brown County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.