⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Brown County › Barnard (57426)

Barnard, SD (57426): well depth, water level & drilling cost

✓ 138 SD DANR records · Brown County

997 ftmedian well depth
100 ft–1,138 fttypical depth range
30 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Barnard (57426) address — $49

How deep are wells in and around Barnard (57426), South Dakota?

The median drilled well depth in and around Barnard (57426) is 997 ft, based on 138 wells with recorded depths in the state SD DANR database. Half fall between 100 ft and 1,138 ft; 90% are shallower than 1,279 ft.

How much does it cost to drill a well in and around Barnard (57426)?

Applying published per-foot rates to the local median depth of 997 ft: drilling and casing alone typically runs $24,925–$64,805; a complete system including pump, pressure tank, and hookup typically runs $59,820–$99,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Barnard (57426)?

The median static water level is 30 ft below ground surface (middle half of wells: 23 ft–41 ft), from 3 measurements.

Drilled depth distribution

0–50 ft 7 50–100 ft 27 100–150 ft 14 150–200 ft 0 200–300 ft 0 300–400 ft 1 400–600 ft 1 600+ ft 88
Looking at a specific property in Barnard (57426)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Barnard (57426)

Free. Goes to licensed drillers working Brown County.

Part of Brown County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.