⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Beadle County › Huron (57399)

Huron, SD (57399): well depth, water level & drilling cost

✓ 433 SD DANR records · Beadle County

767 ftmedian well depth
80 ft–850 fttypical depth range
33 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Huron (57399) address — $49

How deep are wells in and around Huron (57399), South Dakota?

The median drilled well depth in and around Huron (57399) is 767 ft, based on 429 wells with recorded depths in the state SD DANR database. Half fall between 80 ft and 850 ft; 90% are shallower than 980 ft.

How much does it cost to drill a well in and around Huron (57399)?

Applying published per-foot rates to the local median depth of 767 ft: drilling and casing alone typically runs $19,175–$49,855; a complete system including pump, pressure tank, and hookup typically runs $46,020–$76,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Huron (57399)?

The median static water level is 33 ft below ground surface (middle half of wells: 23 ft–41 ft), from 3 measurements.

Drilled depth distribution

0–50 ft 86 50–100 ft 44 100–150 ft 33 150–200 ft 6 200–300 ft 19 300–400 ft 0 400–600 ft 0 600+ ft 241
Looking at a specific property in Huron (57399)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Huron (57399)

Free. Goes to licensed drillers working Beadle County.

Part of Beadle County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.