⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Beadle County › Wolsey (57384)

Wolsey, SD (57384): well depth, water level & drilling cost

✓ 180 SD DANR records · Beadle County

813 ftmedian well depth
90 ft–1,004 fttypical depth range
25 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Wolsey (57384) address — $49

How deep are wells in and around Wolsey (57384), South Dakota?

The median drilled well depth in and around Wolsey (57384) is 813 ft, based on 178 wells with recorded depths in the state SD DANR database. Half fall between 90 ft and 1,004 ft; 90% are shallower than 1,130 ft.

How much does it cost to drill a well in and around Wolsey (57384)?

Applying published per-foot rates to the local median depth of 813 ft: drilling and casing alone typically runs $20,325–$52,845; a complete system including pump, pressure tank, and hookup typically runs $48,780–$81,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Wolsey (57384)?

The median static water level is 25 ft below ground surface (middle half of wells: 19 ft–41 ft), from 7 measurements.

Drilled depth distribution

0–50 ft 6 50–100 ft 46 100–150 ft 21 150–200 ft 0 200–300 ft 0 300–400 ft 0 400–600 ft 0 600+ ft 105
Looking at a specific property in Wolsey (57384)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Wolsey (57384)

Free. Goes to licensed drillers working Beadle County.

Part of Beadle County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.