⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Jerauld County › Wessington Springs (57382)

Wessington Springs, SD (57382): well depth, water level & drilling cost

✓ 371 SD DANR records · Jerauld County

151 ftmedian well depth
82 ft–260 fttypical depth range
47 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Wessington Springs (57382) address — $49

How deep are wells in and around Wessington Springs (57382), South Dakota?

The median drilled well depth in and around Wessington Springs (57382) is 151 ft, based on 371 wells with recorded depths in the state SD DANR database. Half fall between 82 ft and 260 ft; 90% are shallower than 1,050 ft.

How much does it cost to drill a well in and around Wessington Springs (57382)?

Applying published per-foot rates to the local median depth of 151 ft: drilling and casing alone typically runs $3,775–$9,815; a complete system including pump, pressure tank, and hookup typically runs $9,060–$15,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Wessington Springs (57382)?

The median static water level is 47 ft below ground surface (middle half of wells: 22 ft–85 ft), from 13 measurements.

Drilled depth distribution

0–50 ft 42 50–100 ft 66 100–150 ft 76 150–200 ft 53 200–300 ft 51 300–400 ft 9 400–600 ft 1 600+ ft 73
Looking at a specific property in Wessington Springs (57382)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Wessington Springs (57382)

Free. Goes to licensed drillers working Jerauld County.

Part of Jerauld County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.