⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Charles Mix County › Wagner (57380)

Wagner, SD (57380): well depth, water level & drilling cost

✓ 86 SD DANR records · Charles Mix County

215 ftmedian well depth
24 ft–285 fttypical depth range
85 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Wagner (57380) address — $49

How deep are wells in and around Wagner (57380), South Dakota?

The median drilled well depth in and around Wagner (57380) is 215 ft, based on 86 wells with recorded depths in the state SD DANR database. Half fall between 24 ft and 285 ft; 90% are shallower than 684 ft.

How much does it cost to drill a well in and around Wagner (57380)?

Applying published per-foot rates to the local median depth of 215 ft: drilling and casing alone typically runs $5,375–$13,975; a complete system including pump, pressure tank, and hookup typically runs $12,900–$21,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Wagner (57380)?

The median static water level is 85 ft below ground surface (middle half of wells: 81 ft–103 ft), from 4 measurements.

Drilled depth distribution

0–50 ft 26 50–100 ft 2 100–150 ft 1 150–200 ft 7 200–300 ft 29 300–400 ft 9 400–600 ft 2 600+ ft 10
Looking at a specific property in Wagner (57380)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Wagner (57380)

Free. Goes to licensed drillers working Charles Mix County.

Part of Charles Mix County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.