⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Charles Mix County › Platte (57369)

Platte, SD (57369): well depth, water level & drilling cost

✓ 148 SD DANR records · Charles Mix County

860 ftmedian well depth
636 ft–920 fttypical depth range
—median static water level
—median yield (— tests)

Pull every recorded well near a Platte (57369) address — $49

How deep are wells in and around Platte (57369), South Dakota?

The median drilled well depth in and around Platte (57369) is 860 ft, based on 147 wells with recorded depths in the state SD DANR database. Half fall between 636 ft and 920 ft; 90% are shallower than 980 ft.

How much does it cost to drill a well in and around Platte (57369)?

Applying published per-foot rates to the local median depth of 860 ft: drilling and casing alone typically runs $21,500–$55,900; a complete system including pump, pressure tank, and hookup typically runs $51,600–$86,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Platte (57369)?

Few static water level measurements are recorded for this area.

Drilled depth distribution

0–50 ft 18 50–100 ft 2 100–150 ft 0 150–200 ft 1 200–300 ft 4 300–400 ft 6 400–600 ft 4 600+ ft 112
Looking at a specific property in Platte (57369)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Platte (57369)

Free. Goes to licensed drillers working Charles Mix County.

Part of Charles Mix County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.