⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Jerauld County › Lane (57358)

Lane, SD (57358): well depth, water level & drilling cost

✓ 204 SD DANR records · Jerauld County

355 ftmedian well depth
148 ft–916 fttypical depth range
45 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Lane (57358) address — $49

How deep are wells in and around Lane (57358), South Dakota?

The median drilled well depth in and around Lane (57358) is 355 ft, based on 204 wells with recorded depths in the state SD DANR database. Half fall between 148 ft and 916 ft; 90% are shallower than 1,000 ft.

How much does it cost to drill a well in and around Lane (57358)?

Applying published per-foot rates to the local median depth of 355 ft: drilling and casing alone typically runs $8,875–$23,075; a complete system including pump, pressure tank, and hookup typically runs $21,300–$35,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Lane (57358)?

The median static water level is 45 ft below ground surface (middle half of wells: 23 ft–65 ft), from 11 measurements.

Drilled depth distribution

0–50 ft 11 50–100 ft 7 100–150 ft 34 150–200 ft 35 200–300 ft 8 300–400 ft 8 400–600 ft 1 600+ ft 100
Looking at a specific property in Lane (57358)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Lane (57358)

Free. Goes to licensed drillers working Jerauld County.

Part of Jerauld County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.