⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Brule County › Kimball (57355)

Kimball, SD (57355): well depth, water level & drilling cost

✓ 141 SD DANR records · Brule County

920 ftmedian well depth
862 ft–960 fttypical depth range
33 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Kimball (57355) address — $49

How deep are wells in and around Kimball (57355), South Dakota?

The median drilled well depth in and around Kimball (57355) is 920 ft, based on 141 wells with recorded depths in the state SD DANR database. Half fall between 862 ft and 960 ft; 90% are shallower than 1,000 ft.

How much does it cost to drill a well in and around Kimball (57355)?

Applying published per-foot rates to the local median depth of 920 ft: drilling and casing alone typically runs $23,000–$59,800; a complete system including pump, pressure tank, and hookup typically runs $55,200–$92,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Kimball (57355)?

The median static water level is 33 ft below ground surface (middle half of wells: 31 ft–34 ft), from 2 measurements.

Drilled depth distribution

0–50 ft 17 50–100 ft 1 100–150 ft 0 150–200 ft 0 200–300 ft 1 300–400 ft 2 400–600 ft 1 600+ ft 119
Looking at a specific property in Kimball (57355)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Kimball (57355)

Free. Goes to licensed drillers working Brule County.

Part of Brule County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.