South Dakota Well Data › Kingsbury County › Iroquois (57353)
Iroquois, SD (57353): well depth, water level & drilling cost
✓ 347 SD DANR records · Kingsbury County
Pull every recorded well near a Iroquois (57353) address — $49
How deep are wells in and around Iroquois (57353), South Dakota?
The median drilled well depth in and around Iroquois (57353) is 890 ft, based on 346 wells with recorded depths in the state SD DANR database. Half fall between 809 ft and 970 ft; 90% are shallower than 1,050 ft.
How much does it cost to drill a well in and around Iroquois (57353)?
Applying published per-foot rates to the local median depth of 890 ft: drilling and casing alone typically runs $22,250–$57,850; a complete system including pump, pressure tank, and hookup typically runs $53,400–$89,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Iroquois (57353)?
The median static water level is 50 ft below ground surface (middle half of wells: 29 ft–100 ft), from 11 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Kingsbury County.
Part of Kingsbury County well records.
Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.