⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Hyde County › Highmore (57345)

Highmore, SD (57345): well depth, water level & drilling cost

✓ 95 SD DANR records · Hyde County

1,400 ftmedian well depth
125 ft–1,630 fttypical depth range
49 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Highmore (57345) address — $49

How deep are wells in and around Highmore (57345), South Dakota?

The median drilled well depth in and around Highmore (57345) is 1,400 ft, based on 95 wells with recorded depths in the state SD DANR database. Half fall between 125 ft and 1,630 ft; 90% are shallower than 2,051 ft.

How much does it cost to drill a well in and around Highmore (57345)?

Applying published per-foot rates to the local median depth of 1,400 ft: drilling and casing alone typically runs $35,000–$91,000; a complete system including pump, pressure tank, and hookup typically runs $84,000–$140,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Highmore (57345)?

The median static water level is 49 ft below ground surface (middle half of wells: 23 ft–73 ft), from 4 measurements.

Drilled depth distribution

0–50 ft 17 50–100 ft 5 100–150 ft 7 150–200 ft 4 200–300 ft 11 300–400 ft 1 400–600 ft 0 600+ ft 50
Looking at a specific property in Highmore (57345)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Highmore (57345)

Free. Goes to licensed drillers working Hyde County.

Part of Hyde County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.