⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Hanson County › Fulton (57340)

Fulton, SD (57340): well depth, water level & drilling cost

✓ 113 SD DANR records · Hanson County

188 ftmedian well depth
140 ft–360 fttypical depth range
47 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Fulton (57340) address — $49

How deep are wells in and around Fulton (57340), South Dakota?

The median drilled well depth in and around Fulton (57340) is 188 ft, based on 113 wells with recorded depths in the state SD DANR database. Half fall between 140 ft and 360 ft; 90% are shallower than 494 ft.

How much does it cost to drill a well in and around Fulton (57340)?

Applying published per-foot rates to the local median depth of 188 ft: drilling and casing alone typically runs $4,700–$12,220; a complete system including pump, pressure tank, and hookup typically runs $11,280–$18,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Fulton (57340)?

The median static water level is 47 ft below ground surface (middle half of wells: 30 ft–80 ft), from 13 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 1 100–150 ft 25 150–200 ft 29 200–300 ft 18 300–400 ft 18 400–600 ft 16 600+ ft 2
Looking at a specific property in Fulton (57340)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Fulton (57340)

Free. Goes to licensed drillers working Hanson County.

Part of Hanson County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.