⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Jerauld County › Alpena (57312)

Alpena, SD (57312): well depth, water level & drilling cost

✓ 214 SD DANR records · Jerauld County

807 ftmedian well depth
117 ft–965 fttypical depth range
39 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Alpena (57312) address — $49

How deep are wells in and around Alpena (57312), South Dakota?

The median drilled well depth in and around Alpena (57312) is 807 ft, based on 214 wells with recorded depths in the state SD DANR database. Half fall between 117 ft and 965 ft; 90% are shallower than 1,060 ft.

How much does it cost to drill a well in and around Alpena (57312)?

Applying published per-foot rates to the local median depth of 807 ft: drilling and casing alone typically runs $20,175–$52,455; a complete system including pump, pressure tank, and hookup typically runs $48,420–$80,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Alpena (57312)?

The median static water level is 39 ft below ground surface (middle half of wells: 30 ft–63 ft), from 8 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 29 100–150 ft 29 150–200 ft 14 200–300 ft 8 300–400 ft 0 400–600 ft 0 600+ ft 126
Looking at a specific property in Alpena (57312)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Alpena (57312)

Free. Goes to licensed drillers working Jerauld County.

Part of Jerauld County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.