⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Davison County › Mitchell (57301)

Mitchell, SD (57301): well depth, water level & drilling cost

✓ 491 SD DANR records · Davison County

91 ftmedian well depth
24 ft–130 fttypical depth range
34 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Mitchell (57301) address — $49

How deep are wells in and around Mitchell (57301), South Dakota?

The median drilled well depth in and around Mitchell (57301) is 91 ft, based on 487 wells with recorded depths in the state SD DANR database. Half fall between 24 ft and 130 ft; 90% are shallower than 204 ft.

How much does it cost to drill a well in and around Mitchell (57301)?

Applying published per-foot rates to the local median depth of 91 ft: drilling and casing alone typically runs $2,275–$5,915; a complete system including pump, pressure tank, and hookup typically runs $5,460–$9,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Mitchell (57301)?

The median static water level is 34 ft below ground surface (middle half of wells: 11 ft–40 ft), from 14 measurements.

Drilled depth distribution

0–50 ft 174 50–100 ft 88 100–150 ft 139 150–200 ft 33 200–300 ft 21 300–400 ft 19 400–600 ft 12 600+ ft 1
Looking at a specific property in Mitchell (57301)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mitchell (57301)

Free. Goes to licensed drillers working Davison County.

Part of Davison County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.