⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Roberts County › Rosholt (57260)

Rosholt, SD (57260): well depth, water level & drilling cost

✓ 226 SD DANR records · Roberts County

74 ftmedian well depth
59 ft–125 fttypical depth range
14 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Rosholt (57260) address — $49

How deep are wells in and around Rosholt (57260), South Dakota?

The median drilled well depth in and around Rosholt (57260) is 74 ft, based on 225 wells with recorded depths in the state SD DANR database. Half fall between 59 ft and 125 ft; 90% are shallower than 165 ft.

How much does it cost to drill a well in and around Rosholt (57260)?

Applying published per-foot rates to the local median depth of 74 ft: drilling and casing alone typically runs $1,850–$4,810; a complete system including pump, pressure tank, and hookup typically runs $4,440–$7,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Rosholt (57260)?

The median static water level is 14 ft below ground surface (middle half of wells: 11 ft–25 ft), from 16 measurements.

Drilled depth distribution

0–50 ft 34 50–100 ft 109 100–150 ft 50 150–200 ft 18 200–300 ft 7 300–400 ft 0 400–600 ft 7 600+ ft 0
Looking at a specific property in Rosholt (57260)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Rosholt (57260)

Free. Goes to licensed drillers working Roberts County.

Part of Roberts County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.