⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Clark County › Raymond (57258)

Raymond, SD (57258): well depth, water level & drilling cost

✓ 117 SD DANR records · Clark County

195 ftmedian well depth
126 ft–999 fttypical depth range
69 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Raymond (57258) address — $49

How deep are wells in and around Raymond (57258), South Dakota?

The median drilled well depth in and around Raymond (57258) is 195 ft, based on 117 wells with recorded depths in the state SD DANR database. Half fall between 126 ft and 999 ft; 90% are shallower than 1,053 ft.

How much does it cost to drill a well in and around Raymond (57258)?

Applying published per-foot rates to the local median depth of 195 ft: drilling and casing alone typically runs $4,875–$12,675; a complete system including pump, pressure tank, and hookup typically runs $11,700–$19,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Raymond (57258)?

The median static water level is 69 ft below ground surface (middle half of wells: 50 ft–89 ft), from 8 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 13 100–150 ft 20 150–200 ft 23 200–300 ft 8 300–400 ft 1 400–600 ft 1 600+ ft 47
Looking at a specific property in Raymond (57258)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Raymond (57258)

Free. Goes to licensed drillers working Clark County.

Part of Clark County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.