⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Brookings County › Bruce (57220)

Bruce, SD (57220): well depth, water level & drilling cost

✓ 174 SD DANR records · Brookings County

43 ftmedian well depth
30 ft–70 fttypical depth range
12 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Bruce (57220) address — $49

How deep are wells in and around Bruce (57220), South Dakota?

The median drilled well depth in and around Bruce (57220) is 43 ft, based on 174 wells with recorded depths in the state SD DANR database. Half fall between 30 ft and 70 ft; 90% are shallower than 101 ft.

How much does it cost to drill a well in and around Bruce (57220)?

Applying published per-foot rates to the local median depth of 43 ft: drilling and casing alone typically runs $1,075–$2,795; a complete system including pump, pressure tank, and hookup typically runs $2,580–$4,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Bruce (57220)?

The median static water level is 12 ft below ground surface (middle half of wells: 9 ft–33 ft), from 16 measurements.

Drilled depth distribution

0–50 ft 107 50–100 ft 47 100–150 ft 12 150–200 ft 4 200–300 ft 4 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Bruce (57220)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Bruce (57220)

Free. Goes to licensed drillers working Brookings County.

Part of Brookings County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.