⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Clay County › Wakonda (57073)

Wakonda, SD (57073): well depth, water level & drilling cost

✓ 74 SD DANR records · Clay County

145 ftmedian well depth
100 ft–180 fttypical depth range
72 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Wakonda (57073) address — $49

How deep are wells in and around Wakonda (57073), South Dakota?

The median drilled well depth in and around Wakonda (57073) is 145 ft, based on 74 wells with recorded depths in the state SD DANR database. Half fall between 100 ft and 180 ft; 90% are shallower than 204 ft.

How much does it cost to drill a well in and around Wakonda (57073)?

Applying published per-foot rates to the local median depth of 145 ft: drilling and casing alone typically runs $3,625–$9,425; a complete system including pump, pressure tank, and hookup typically runs $8,700–$14,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Wakonda (57073)?

The median static water level is 72 ft below ground surface (middle half of wells: 10 ft–80 ft), from 8 measurements.

Drilled depth distribution

0–50 ft 6 50–100 ft 12 100–150 ft 19 150–200 ft 24 200–300 ft 8 300–400 ft 1 400–600 ft 3 600+ ft 1
Looking at a specific property in Wakonda (57073)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Wakonda (57073)

Free. Goes to licensed drillers working Clay County.

Part of Clay County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.