⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Brookings County › Volga (57071)

Volga, SD (57071): well depth, water level & drilling cost

✓ 106 SD DANR records · Brookings County

43 ftmedian well depth
27 ft–65 fttypical depth range
16 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Volga (57071) address — $49

How deep are wells in and around Volga (57071), South Dakota?

The median drilled well depth in and around Volga (57071) is 43 ft, based on 106 wells with recorded depths in the state SD DANR database. Half fall between 27 ft and 65 ft; 90% are shallower than 141 ft.

How much does it cost to drill a well in and around Volga (57071)?

Applying published per-foot rates to the local median depth of 43 ft: drilling and casing alone typically runs $1,075–$2,795; a complete system including pump, pressure tank, and hookup typically runs $2,580–$4,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Volga (57071)?

The median static water level is 16 ft below ground surface (middle half of wells: 14 ft–16 ft), from 8 measurements.

Drilled depth distribution

0–50 ft 62 50–100 ft 28 100–150 ft 6 150–200 ft 3 200–300 ft 6 300–400 ft 0 400–600 ft 1 600+ ft 0
Looking at a specific property in Volga (57071)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Volga (57071)

Free. Goes to licensed drillers working Brookings County.

Part of Brookings County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.