⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Union County › Elk Point (57025)

Elk Point, SD (57025): well depth, water level & drilling cost

✓ 192 SD DANR records · Union County

112 ftmedian well depth
95 ft–199 fttypical depth range
21 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Elk Point (57025) address — $49

How deep are wells in and around Elk Point (57025), South Dakota?

The median drilled well depth in and around Elk Point (57025) is 112 ft, based on 191 wells with recorded depths in the state SD DANR database. Half fall between 95 ft and 199 ft; 90% are shallower than 300 ft.

How much does it cost to drill a well in and around Elk Point (57025)?

Applying published per-foot rates to the local median depth of 112 ft: drilling and casing alone typically runs $2,800–$7,280; a complete system including pump, pressure tank, and hookup typically runs $6,720–$11,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Elk Point (57025)?

The median static water level is 21 ft below ground surface (middle half of wells: 17 ft–24 ft), from 35 measurements.

Drilled depth distribution

0–50 ft 12 50–100 ft 43 100–150 ft 70 150–200 ft 18 200–300 ft 28 300–400 ft 10 400–600 ft 9 600+ ft 1
Looking at a specific property in Elk Point (57025)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Elk Point (57025)

Free. Goes to licensed drillers working Union County.

Part of Union County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.