South Dakota Well Data › Minnehaha County › Dell Rapids (57022)
Dell Rapids, SD (57022): well depth, water level & drilling cost
✓ 80 SD DANR records · Minnehaha County
Pull every recorded well near a Dell Rapids (57022) address — $49
How deep are wells in and around Dell Rapids (57022), South Dakota?
The median drilled well depth in and around Dell Rapids (57022) is 42 ft, based on 79 wells with recorded depths in the state SD DANR database. Half fall between 25 ft and 58 ft; 90% are shallower than 105 ft.
How much does it cost to drill a well in and around Dell Rapids (57022)?
Applying published per-foot rates to the local median depth of 42 ft: drilling and casing alone typically runs $1,050–$2,730; a complete system including pump, pressure tank, and hookup typically runs $2,520–$4,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Dell Rapids (57022)?
The median static water level is 14 ft below ground surface (middle half of wells: 10 ft–15 ft), from 6 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Minnehaha County.
Part of Minnehaha County well records.
Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.